Name: Production technology transfer of Titanium boron Refining agent for aluminum alloy smelting
Rating: 4.7 (91 reviews)

Chinese English

Index

About US

Technical Center

Special chemical technology for anodic oxidation Special chemical technology for pre-treatment of a Aluminum alloy electrophoretic coating series che Aluminum and magnesium alloy smelting flux series Ceramic polishing antifouling series chemical tec Nano metal sol series chemical technology >

Kequan Laboratory

News

Contacts

产品详情

Production technology transfer of Titanium boron Refining agent for aluminum alloy smelting

Ⅰ、Introduction of technical achievements and

products

Aluminum, titanium and boron refiner is composed of highly active

metal powder and flux with certain characteristics. Under the action

of flux, pure metal powder dissolves and diffuses rapidly in the melt

to generate key compounds such as TiAl3 and TiB2 that promote

nucleation, so as to play a good refining effect.

Ⅱ、Product features and usage

Product advantages

1, high density, easy to sink, under the action of gravity and molten

salt gas, up and down, rapid reaction, no burning loss and oxidation,

avoid the waste of effective components.

2, block weight diversification, to meet different requirements, easy

to accurate quantitative.

3. Diversification of titanium and boron to meet the different

requirements of the market for refining effect and titanium and

boron content.

4. Due to the refining effect of the heterogeneous grain of the

additive, the porosity and porosity can be effectively reduced at the same time, and the elongation of casting, ingot and casting rod can

be significantly improved.

5, its excellent thinning effect, make the casting get fine equiaxed

crystal, eliminate feather crystal and columnar crystal, for the future

processing to provide a good internal structure, can effectively

overcome the casting crack, improve the appearance of the casting,

reduce the cold insulation of the casting.

Usage and dosage

Dosage is about 0.05%~0.1% of the weight of liquid aluminum (0.5~

1.0kg per ton of aluminum), when the temperature of liquid

aluminum reaches 700℃~750℃, remove the scum on the surface of

liquid aluminum, put titanium boron refiner into liquid aluminum at

this time smoke and flame, put after standing for 10 minutes, Then

stir evenly (the method of adding titanium and boron refiner is very

simple, can be directly put into the aluminum melt, it will

automatically sink, do not need to press, in the process of sinking

reaction began, due to titanium and boron refiner gas, in the block of

titanium and boron refiner around a large amount of gas, block and

floating. In the process of floating up, the gas around the block titanium boron refiner escapes and the block sinks again. As a result

of gas generation, the block rises again. This cycle continues until the

reaction is complete.

Packaging, storage and transportation

Plastic bag sealed 2kg packing, outer carton, 20kg/ carton.

Term of validity: one year (stored in indoor dry place, packaging

without damage), heat, moisture, sun protection during storage and

transportation.

Ⅲ、Application field, market prospect and industrial

production conditions of project products

Aluminum, titanium and boron refiner is mainly used in the smelting

of pure aluminum, aluminum alloy and recycled aluminum, refining

the internal grain structure of aluminum alloy, aluminum and

aluminum alloy smelting must be used to add one of the flux, large

market demand, broad application prospects.

The production equipment and process of aluminum, titanium and

boron refiner are relatively simple, mainly drying furnace, crushing

equipment, mixing equipment, simple packaging equipment,

equipment investment is less, the production process is easy to

master.

Ⅳ、Analysis of technical and economic benefit of project

industrialization and environmental evaluation

The sales gross profit of al ti b refiner is about 3000 ~ 3500 yuan/ton.

The cost of raw materials fluctuates with the market price and varies

with the production volume. Raw material market is easy to buy,

mass production to form a scale, with good economic benefits.

The raw materials used in the production of aluminum, titanium and

boron refiner are non-toxic common chemical raw materials, the

production process without sewage, waste gas, waste residue

discharge, will not cause pollution to the environment.

Ⅴ、Methods of technology transfer and cooperation

One-time technology transfer, provide a full set of technical formula, production process, equipment list and raw material procurement manufacturers, construction specifications, etc.

Can study in my company, on-site training, learn so far. Engineers can also be sent to provide on-site technical services to guide the production of qualified products. At the same time, we can provide a complete set of solutions such as plant and equipment selection, how to promote the market, raw material procurement, how to make color plate, how to reduce production cost and improve production efficiency, so that you can put into production in the shortest time and make profits quickly. You can change the formula as needed. And a professional engineer consultant, can long-term tracking technical guidance, remove worries.

Detailed project feasibility analysis report on request.

Product technology for large-scale production of mature technology, technology transfer fee call to discuss.

Titanium boron refiner for aluminum smelting